Product · GL24h
Standard or made to measure
We hold permanent stock of a wide range of glulam sections in both pine and fir: seven standard sections in strength class GL24h and lengths from 12.00 to 13.50 m, cross-cut and machined to measure.
Machined for installation
We supply glulam for structural or decorative elements, in our standard sizes or made to measure. Each beam leaves the plant cross-cut and, if the project requires it, with autoclave treatment, wood stain or fire-retardant treatment.
The beam machining centre handles pieces over 13 m: joints from our machining catalogue or made to measure, from your drawings or drawing files, with technical advice included.
Standard sizes
| Sections (mm) |
|---|
| 120 × 60 |
| 160 × 80 |
| 200 × 100 |
| 120 × 120 |
| 140 × 140 |
| 240 × 120 |
| 200 × 200 |
Contact us for any other sizes or sections you may need.
Grades and services
- Strength class
- GL24h
- Species
- Scots pine or fir
- Stock
- Permanent, in pine and in fir
- Standard sections
- 7
- Lengths
- 12.00 · 12.50 · 13.00 · 13.50 m
- Cross-cutting
- Made to measure
- Machining
- Made to measure
- Finishes
- Suitable for brushing, wood stain, varnish or paint
- Treatment certificate
- Per batch, on request
Cross-cut to measure
Each beam leaves cross-cut to the length your project requires.
Made-to-measure machining
Joints from our machining catalogue or made to measure, from your drawings or drawing files.
Autoclave treatment
If the project requires it: use classes 3.1, 3.2 and 4 (UNE-EN 335). Treatment certificate per batch, on request.
Enquiry
Tell us about your project
Send us the drawing or cutting list and we will prepare a proposal. With the measurements, quantities and the location where the wood will go, the answer is more precise.
Av. de Reus, s/n · 43460 Alcover (Tarragona)
Monday to Thursday: 8.00 – 18.00Friday: 7.00 – 15.00