Products · Catalogue p. 8
Pergola kits for professionals
At Tractia we manufacture pergola kits made to measure for each client, with a range of finishing and machining options. Drawn up as a dimensioned drawing, with confirmed site measurements: on site, just assemble.
0 cuts on site
All structures and pergolas are supplied as kits for easy installation. The precision of the machining means that the wood, once on site, needs no further cutting or machining: assembly is simpler and costs less, and the finish that arrives on site is the one that was shown to the end client.
Each pergola is drawn up as a dimensioned drawing, with the site measurements confirmed. The technical office turns each sketch into a dimensioned or 3D technical drawing, with all the construction details, and we machine once the measurements are confirmed.
Kit data
- Cuts on site
- 0
- Drawing
- Dimensioned drawing · confirmed site measurements
- Supply
- As a kit, for easy installation
- Treatment
- Autoclave, use class 3 (UNE-EN 335), if the project requires it
- Finish
- Wood stain, varnish or paint, in a booth
- Documentation
- Treatment certificate per batch, on request
Model cutting list
| Ref. | Piece |
|---|---|
| A | Post |
| B | Main beam |
| C | Purlin |
| D | Brace |
Model from the 2026 catalogue · page 8.
Kit customisation
Each kit can have main beam and purlin ends with a pigeon-breast profile or other machining, with or without overhang; direct bearing on a wall, without one or more posts; sloping purlins, with one or more roof pitches; a polygonal plan; and a roof of tongue-and-groove boarding.
The image shows a 3D model of a dual-pitch roof, like those the technical office sends back to confirm details and measurements before machining.
- Dual-pitch roof · 3D model
Cross-cutting
Transverse cutting of wood planks. For example: a 4.00 m long plank cut into 2.50 m + 1.50 m.
Planing
Cleaning up all four faces of the plank. The edges can be left square, bevelled, rounded or with another moulding.
Machining
Mouldings, holes, joints and other finishes on the wood pieces.
Use class 3
In the open, not in contact with the ground and frequently wetted. For example: exterior joinery, pergolas.
Made-to-measure pergolas for awning and outdoor decoration professionals.
Tractia Catalogue 2026 · page 8
Enquiry
Tell us about your project
Send us the drawing or cutting list and we will prepare a proposal. With the measurements, quantities and the location where the wood will go, the answer is more precise.
Av. de Reus, s/n · 43460 Alcover (Tarragona)
Monday to Thursday: 8.00 – 18.00Friday: 7.00 – 15.00