Solid wood
Battens and profiles
Autoclave-treated Scots pine battens: 21 planed sections, 10 unplaned and 3 with a tongue-and-groove or concealed-fixing profile. We adapt to your machining and size requirements, with square, rounded or bevelled edges.
Technical data
- Species
- Scots pine
- Treatment
- Autoclave · use classes 3.1, 3.2 and 4 (UNE-EN 335)
- Sections
- 21 planed · 10 unplaned · 3 profiled
- Edges
- Square · rounded · bevelled
- Profiles
- Tongue and groove · concealed fixing
- Documentation
- Treatment certificate per batch, on request
Batten sections
| Wood | Finish | Sections · width × thickness (mm) | Total |
|---|---|---|---|
| Scots pine V | Planed and autoclave-treated | 55 × 22 · 95 × 22 · 120 × 22 · 45 × 24 · 45 × 30 · 34 × 34 · 55 × 34 · 120 × 34 · 45 × 45 · 68 × 45 · 95 × 45 · 120 × 45 · 145 × 45 · 68 × 50 · 68 × 68 · 105 × 68 · 145 × 68 · 220 × 68 · 90 × 90 · 190 × 90 · 120 × 120 | 21 |
| Scots pine VI | Unplaned and autoclave-treated | 38 × 20 · 50 × 20 · 50 × 26 · 38 × 30 · 50 × 32 · 38 × 38 · 75 × 40 · 50 × 46 · 75 × 52 · 75 × 70 | 10 |
| Scots pine V | Tongue and groove or with a concealed-fixing profile, and autoclave-treated | 95 × 22 · 120 × 22 · 120 × 34 | 3 |
For other sections, please contact our Sales Department.
First we machine, then we treat
Machining carried out after treatment can impair it and leave points of attack in the wood. That is why we cut and machine before treating: this way we ensure that the product penetrates the entire surface of the wood evenly.
We apply autoclave treatment in use class 3 (3.1 and 3.2, clear) and in use class 4 (copper salts), in accordance with standard UNE-EN 335. The location decides the treatment: let us know where the wood will go.
- Use class 3 (3.1 and 3.2) · clear
- Use class 4 · copper salts
- Standard UNE-EN 335
Cross-cutting
Transverse cutting of wood planks. For example: a 4.00 m long plank cut into 2.50 m + 1.50 m.
Rip sawing
Lengthwise sawing of wood planks. For example: a 200 mm wide plank sawn into 150 mm + 50 mm.
Planing
Cleaning up all four faces of the plank. The edges can be left square, bevelled, rounded or with another moulding.
Machining
Mouldings, holes, joints and other finishes on the wood pieces.
Enquiry
Tell us about your project
Send us the drawing or cutting list and we will prepare a proposal. With the measurements, quantities and the location where the wood will go, the answer is more precise.
Av. de Reus, s/n · 43460 Alcover (Tarragona)
Monday to Thursday: 8.00 – 18.00Friday: 7.00 – 15.00